Skip to content
San AntonioInsulation Pros
Attic with insulation installed across the floor joists in a San Antonio home

Converse Attic Insulation

Attic Insulation in Converse, TX

Attic insulation loses depth over the years, leaving rooms hotter in summer and your AC running longer.

San Antonio Insulation Pros helps Converse, TX, homeowners bring tired attic insulation back to full performance. In homes built decades ago, we look for settled material, bare patches and gaps around attic openings that let heat into your rooms. Depending on what we find, we'll recommend adding blown-in insulation or removing and replacing damaged material. A free estimate comes first, so you know the cost before any work is scheduled.

Get a free quote

Takes 30 seconds. No obligation.

Local homes

Same Attic Insulation Since the 80s or 90s? Here's What Time Does to It

If your Converse home went up in the 1980s or 90s, the insulation over your ceilings has been working for 30 years or more. Here's what can happen to it in that time:

  • It settles and flattens: Loose insulation loses height over the years, and every inch it loses lowers its R-value.
  • Storage crushes it: Boxes, holiday decorations and plywood walkways press it flat in the spots you use most.
  • Repairs leave gaps: A new AC unit, rewired lights or a plumbing fix can push insulation aside, and it doesn't always get put back.
  • Old light fixtures leak: Older recessed lights are often not airtight, so attic air can drift into the rooms below.

The good news is that many older attics don't need a tear-out. If the existing insulation is dry and clean, we seal the gaps and build it back up.

How older insulation settles and where air leaks through
How older insulation settles and where air leaks through.

Why It Matters

What Makes Attic Insulation in Converse, TX Worth Checking

  • 01A large 1980s and 90s housing stock: About 28% of Converse homes were built between 1980 and 1999. That insulation has been in place for decades.
  • 02Bexar County heat: Converse is in Climate Zone 2A, the hot-humid zone. A thin attic layer lets summer heat straight through to your ceilings.
  • 03Current codes, current targets: The City of Converse reviews building plans under the 2024 I-Codes. For existing attics, our target is R-38 to R-49, measured over the full floor.
  • 04Newer subdivisions too: Converse has added neighborhoods such as Summerhill, Knox Ridge, Notting Hill and Hightop Ridge. Those newer attics are still worth measuring, especially at the edges and the hatch.

1980s–90s stock

~28% 1980–1999

Bexar County heat

Climate Zone 2A

Current targets

R-38 to R-49

Newer subdivisions

Edges & hatch

Source: U.S. Census Bureau, American Community Survey 5-year estimates (2024).

How It Works

From First Look to Finished Attic in Converse, TX

  1. Look and measure

    We check how deep the old insulation is, what shape it's in and where air leaks through.

  2. Top-up or replace

    We tell you whether your existing layer can stay or should come out, and why.

  3. Itemized quote

    You see a separate price for removal, sealing and new insulation.

  4. Seal and install

    Gaps get sealed first, the soffit vents stay clear, and new insulation goes in evenly.

  5. Final look together

    We walk through the attic with you and tidy the work area before we head out.

Customer Reviews

What Our Customers Say

Read on Google Maps (opens in a new tab)

Home insulation services for San Antonio residences

Free Estimate

Request a Free Attic Insulation Estimate in Converse, TX

Tell us the year your home was built, if you know it, and we'll schedule a visit to measure your attic.

Free inspection, no obligation. Prefer to talk? Call (445) 270-7997.

Why Us

Why Converse Homeowners Trust Our Team

Based next door in San Antonio

Converse is a short drive from our San Antonio location, so booking a visit is easy.

Keep what still works

If your old insulation is sound, we build on it instead of charging you to tear it out.

Licensed and insured

Every Converse attic we work in is covered by our licensed and insured team.

Itemized quotes

Each part of the job sits on its own line, so you can see where your money goes.

FAQ

Converse Attic Insulation Questions

Possibly not. Loose insulation settles and gets disturbed over the years, so a 30-year-old layer may sit well below R-38. Measuring it is the only way to know.

Our goal is R-38 to R-49 over every part of the attic floor. During the inspection, we measure your current level and show you how far it is from that range.

Yes, if the old layer is dry, clean and free of pest damage. We seal the gaps first and then add the new insulation over it.

Water stains, mold, a musty smell, droppings or nesting, and insulation that's packed flat are the main signs. We look for each one during the inspection.

It can. Anything resting on insulation presses it down and lowers its R-value. We'll point out flattened areas and include them in the top-up.

It's still worth measuring. Newer homes went up under more recent codes, but thin edges and gaps around the hatch can turn up in any attic.

Yes. Wet, moldy, pest-damaged or crushed insulation comes out before any new insulation goes in.

We price it after measuring. Attic size, how much insulation you have now, and whether sealing or removal is needed all factor in, and the estimate visit is free.